| Set CAD-format | ||
|---|---|---|
| Clamp-Profile Hanger 8 E | CADPDFRFQ |
Preview
Clamp-Profile Hanger 8 E
4 bolts, St, bright zinc-plated 4 washers ISO 7093-2 -8- 200 HV, bright zinc-plated 4 T-Slot Nuts 8 St M8, bright zinc-plated
Scope of Delivery
4 bolts, St, bright zinc-plated 4 washers ISO 7093-2 -8- 200 HV, bright zinc-plated 4 T-Slot Nuts 8 St M8, bright zinc-plated
Properties
| line 8 | line 8 |
|---|---|
| ESD-safe | No |
| Weight | m = 112 g |
| Delivery unit | 1 set |
Clamp-Profile Hanger E: to be used with Clamp-Profile Fasteners E. > clearance between frame profile and Stand Profile 12 mm > medium load-carrying capacity > lateral tolerance adjustment 6 mm
Clamp-Profile Hangers E can be used to hang frame elements into any desired construction with Clamp-Profile Fasteners E. By integrating the suspension facility into the corner areas of the frame element, it is possible to achieve a very narrow gap (12 mm) between the frame element and the stand.
Suspended frame elements can also be locked if required by subsequently moving the lower Clamp- Profile Hanger.
Installation sequence: 1. Hook the frame element into the existing construction. 2. Fix the height of the frame element using the upper hangers (a). 3. Move the lower Clamp-Profile Hangers to lock the frame element in position (if required).
Installation sequence: 1. Hook the frame element into the existing construction. 2. Fix the height of the frame element using the upper hangers (a). 3. Move the lower Clamp-Profile Hangers to lock the frame element in position (if required).