Label Profile D30 e ESD, transparent lilac

Always know where things are! Fastening Profile D30 0-20° e ESD and Label Profile D30 e ESD help you maintain an overview during even the trickiest installation scenarios. The Label Profile can either be clipped directly to the flank of a Profile Tube D30 or can be installed on the Fastening Profile. The geometry of the Fastening Profile allows you to fit labels angled at 0° or 20° up or down. This ensures labels are always clearly legible for compartments situated above and below the label, as well as on Profile Tubes that are twisted. Furthermore, a continuous Label Profile can be fastened along the entire length of a cross profile, even if the roller conveyor fastening brackets of a FIFO rack take up some sections. To achieve this, the Fastening Profile is fitted in sections. The asymmetrical design of the strip ensures that neither the holder nor the label protrude over the top edge of the profile, which would put them at risk of being torn off. Labels can be 30 mm high and can be easily slotted into place from above thanks to a wide opening angle. Even if Label Profile D30 e ESD is inverted 180°, the label will not drop out.