| Set CAD-format |
|---|
Preview
Shaft-Clamp Profile 5 D6, natural
Configurated product data
Nothing generated yet
You must configurate your product below before requesting quoteProperties
| line 5 | line 5 |
|---|---|
| ESD-safe | No |
| Cross-sectional area | A = 0.32 cm2 |
| Weight | m = 0.09 kg/m |
| Delivery unit | cut-off max. 3000 mm |
| Material | Al, anodized |
| Colour | natural |
Shaft-Clamp Profile 5 D6 is used for securing Shaft D6 to the groove of a Line 5 Profile. After pressing the Shaft-Clamp Profile into the profile groove, the Shaft is then pressed in. Shaft-Clamp Profiles must not be used on profile grooves of types "light" and "E", because sufficient clamping will not be achieved.